PA1200DT

BRUNSWICK, Ohio - Tharo Systems, Inc. presents the new PA1200DT Dual Tamp Label Printer/Applicator. This new multi-function Printer/Applicator can print and apply labels to 2 adjacent carton/product surfaces - front and side, front and top, corner wrap or a simple front apply.

The PA1200DT was designed, engineered and built by Tharo Systems and is currently available using the Tharo H-Series thermal/thermal transfer printers with print resolutions of 203 or 300 dpi.

After a label is printed, it is stripped from the liner and held by suction on the tamp applicator pad. The tamp pad is mounted on a heavy-duty swing arm that extends over a conveyor and tamps the label to the front surface of the carton. When the tamp pad returns to its starting position, it collects another printed label and applies it to the side or top of the carton. The PA1200DT can also be set up to apply labels to a single surface or as a corner wrap.

With a print width of up to 4” wide and a print length of up to 13” long, labels can be as small as 2” x 1” and up to 4.5” x 13”.

Tina Benko
Tharo Systems, Inc.
2866 Nationwide Parkway
Brunswick, OH 44212
Tel: 800-878-6833, 330-273-4408
Fax: 330-225-0099
www.tharo.com * [email protected]

Hide comments

Comments

  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Publish