Model 250

Jan. 21, 2007
FORT WORTH, Texas--ID Technology has designed a printer applicator for production floors with limited space that cannot accommodate a standard Model 250

FORT WORTH, Texas--ID Technology has designed a printer applicator for production floors with limited space that cannot accommodate a standard Model 250 Corner Wrap System. This modified Model 250 requires less aisle space and is comprised of standard “off-the-shelf” IDT components mounted on a custom face plate.

The new design results in a space saving, compact footprint (16” deep by 38” long, measuring along the length of the conveyor). This configuration utilizes IDT Model 250 modules and a pivoting vacuum grid with attached follow along roller.

Even with the customized narrow aisle design, operators can easily access the pneumatics, electronics and other components because the entire system, like the standard system, is a truly modular design. All applicator modules can be replaced within moments by removing two or four bolts, installing a new module, and getting back in to production.

ID Technology, a division of Pro Mach, is a manufacturer and integrator of labeling, coding and marking systems, as well as, peripheral equipment, supplies and service. For more information or to locate the one of the ID Technology nationwide sales and service centers, call 888.438.3242 or visit our website at www.idtechnology.com.

Contacts
ID Technology
Becky Roccaforte
817-624-6859
Fax: 817-626-0553
E-mail: [email protected]
www.idtechnology.com