Industrial Floor Tiles

May 4, 2006
Tuff-Seal can be placed directly over concrete, wood or steel subfloors as well as over existing epoxy floor coatings. No plant downtime is incurred during

Tuff-Seal can be placed directly over concrete, wood or steel subfloors as well as over existing epoxy floor coatings. No plant downtime is incurred during installation, which requires no adhesive, special tools, installation skills or subfloor prep.

Full release:

Tuff-Seal Industrial Flooring Announced by Flooring Adventures

Tuff-Seal Industrial floor tiles utilize a patented hidden interlock system that creates a locked, watertight and virtually seamless surface that will not crack, deflect or shift under heavy rolling loads. Tuff-Seal can be placed directly over concrete, wood or steel subfloors as well as over existing epoxy floor coatings. No plant downtime is incurred during Tuff-Seal’s DIY installation, which requires no adhesive, special tools, installation skills or subfloor prep. Tuff-Seal tiles can be removed and replaced in seconds without cutting or disturbing surrounding tiles.

Richmond, VA (PRWEB) February 27, 2006 -- Tuff-Seal Industrial Flooring has been announced by Flooring Adventures at the 2006 National Plant Engineering and Maintenance Show.

Tuff-Seal Industrial floor tiles utilize a patented hidden interlock system that creates a locked, watertight and virtually seamless surface that will not crack, deflect or shift under heavy rolling loads. Tuff-Seal can be placed directly over concrete, wood or steel subfloors as well as over existing epoxy floor coatings. No plant downtime is incurred during Tuff-Seal’s DIY installation, which requires no adhesive, special tools, installation skills or subfloor prep. Tuff-Seal tiles can be removed and replaced in seconds without cutting or disturbing surrounding tiles.

Tuff-Seal Industrial reduces worker fatigue, muffles noise, is highly slip-resistant even when wet and reduces dust. It hides cracks and stains, does not require expensive or frequent repair or replacement and uses standard floor cleaning methods. Since Tuff-Seal is normally not subfloor-adhered, its cost may be fully-deductible in the first year. Its life cycle cost is lower than most epoxy floor coatings.

Tuff-Seal uses no solvents, sealers or adhesives and can thus be installed in VOC-sensitive or restricted areas. Tuff-Seal tiles are 18” x 18” (450 mm x 450 mm), ¼” (6.5 mm) thick, weigh 3.5 pounds (1.55 kg) and are available in four surface profiles (stud, marquis, diamond and smooth) and nine colors (blue, red, teal, taupe, black, light gray, dark gray, white and canvas).

For Tuff-Seal Industrial Flooring information and samples, contact Flooring Adventures, 7453 Whitepine Road, Richmond, VA 23237, 877-779-2454, www.tuffsealtile.com

Contact Information
Kelly Mortensen
Flooring Adventures LLC
www.tuffsealtile.com
877-779-2454