IMS Safety Muting System

April 21, 2005
FREMONT, CA Scientific Technologies Inc. introduces the IMS Safety Muting System. The IMS system easily integrates into nearly any entrance and exit conveyor

FREMONT, CA – Scientific Technologies Inc. introduces the IMS Safety Muting System. The IMS system easily integrates into nearly any entrance and exit conveyor system application, and is engineered to distinguish between material and people entering a dangerous area. This differentiation is achieved by arranging the muting sensors such that only a very particular combination of signals triggered by incoming material allows the system to enter a safety-muted state.

In the past, several components were required to create a safety barrier that would differentiate material from people. Additionally, these systems required complex wiring and programming. The IMS provides all of the necessary components in a single package, wired and assembled on a robust platform for easy installation and use.

With the IMS, an immediate machine stop is triggered if the proper sensor sequence or combination does not occur, e.g. if a person has entered the access area. If, however, a product is passing by on a conveyor, the system detects this without interrupting the workflow by muting, or temporarily inhibiting the operation of the safety system so that manufacturing operations continue normally.

For example, in packaging lines where a conveyor carries palletized loads into or out of packaging machines, the pallet must be allowed free flow into and away from the packaging machine area. Personnel are blocked from the entry and exit points of the danger area as the pallet is conveyed to and from the machine. However, during non-hazardous times of operation the entrance and exit are freely accessible to fork lift trucks and other personnel.

With headquarters in the heart of Silicon Valley, STI was founded over 30 years ago and employs more than 340 people. STI has been selected twice by Forbes and three times by Business Week as one of the “world’s best small companies.” STI’s safety products are used to protect workers around machinery, automated equipment and industrial robots.

For more information contact: Scientific Technologies Inc., 6550 Dumbarton Circle, Fremont, CA 94555; 1-800-479-3658; (510) 608-3400; fax: (510) 744-1442; Fax Back System: (916) 431-6544; E-mail: [email protected]; Web site: www.sti.com.

New Guide to Measuring and Profiling Scanners
STI's 2004-05 Measuring and Profiling Scanners and Sensors catalog is now available! This guide features helpful product selection guidelines, as well as detailed information, specifications, ordering information and application examples on their complete line of measuring light curtains, vehicle scanners, area sensors, part detection scanners and yarn break sensors. Applications for non-contact measurement include par profiling, hole detection, slack loop control, part detection to name a few.
Click here to register to receive your copy! Click Here